Master/Slave Mode; Automatic; Controlled By Dmx512 - Beamz LCB-384 User Manual

Master/Slave mode

Connect the LCB-384 as below picture and power on all the connecting products. Control panel of
master displays current saved mode and slave displays L005.L009.L013.Number of products
connected can be shown on the slave control panel, slaves follow the actions of master.
Master/Slave connecting：
DMX IN

Automatic

LCB-384 will display current actions automatically without music or when sound sensitivity is turned
off.

Controlled by DMX512

Follow below picture and power on all connected products. The products will be controlled once the
address is set up.
DMX512 signal is received and transmitted by the first product, the others follow the actions of the first
one.
Master/Slave mode by DMX512:
DMX OUT
Slave
Slave
DMX IN
DMX OUT
DMX IN
DMX OUT
Continue
Slave
‐ 7 ‐
Master/Slave link