Dhcp Server; Dynamic Pool Settings - D-Link DAP-3662 User Manual

Section 3 - Configuration
The DHCP address pool defines the range of the IP address that can be assigned to stations in the network. A Dynamic Pool allows wireless stations
to receive an available IP with lease time control. Once a user is finished, click the Save button to let the changes take effect.
Function Dynamic Host Configuration Protocol (DHCP) assigns
Enable/Disable: dynamic IP addresses to devices on the network. This
protocol simplifies network management and allows new
wireless devices to receive IP addresses automatically
without the need to manually assign new IP addresses.
Select Enable to allow the DAP-3662 to function as a DHCP
server.
IP Assigned Input the first IP address available for assignment on your
From: network.
The Range of Enter the number of IP addresses available for assignment.
Pool (1-254): IP addresses are increments of the IP address specified in
the "IP Assigned From" field.
Subnet Mask: All devices in the network must have the same subnet mask
to communicate. Enter the submask for the network here.
Gateway: Enter the IP address of the gateway on the network.
WINS: Specify the Windows Internet Naming Service (WINS) server
address for the wireless network. WINS is a system that
determines the IP address of a network computer that has
a dynamically assigned IP address.
DNS: Enter the IP address of the Domain Name System (DNS)
server. The DNS server translates domain names such as
www.dlink.com into IP addresses.
D-Link DAP-3662 User Manual

DHCP Server

Dynamic Pool Settings

61