Wireless Settings; Access Point Mode - D-Link DAP-3662 User Manual

Section 3 - Configuration
In Access Point mode, the DAP-3662 functions as a wireless AP. After configuring the desired settings, click the Save button.
Wireless Band: Select either 2.4 GHz or 5 GHz from the drop-down menu.
Mode: Select Access Point from the drop-down menu. The other three choices
are WDS with AP, WDS, and Wireless Client.
Network Name Service Set Identifier (SSID) is the name designated for a specific wireless
(SSID): local area network (WLAN). The SSID's default setting is dlink. The SSID
can easily be changed to connect to an existing wireless network or to
establish a new wireless network. The SSID can be up to 32 characters
and is case-sensitive.
Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID
SSID Visibility:
across the network, thus making it visible to all network users.
Auto Channel
Enabling this feature automatically selects the channel that provides the
best wireless performance. Enable is set by default. The channel selection
Selection:
process only occurs when the AP is booting up.
Channel:
All devices on the network must share the same channel. To change the
channel, first toggle the Auto Channel Selection setting to Disable, and
then use the drop-down menu to make the desired selection.
Note: The wireless adapters will automatically scan and match the wireless
settings.
Channel Width: Allows selection of the channel width you would like to operate in. 20
MHz and Auto 20/40 MHz allow both 802.11n and non-802.11n wireless
devices on your network when the wireless mode is Mixed 802.11 b/g/n
in 2.4G and Mixed 802.11 a/n in 5G. When the channel width is set to
Auto 20/40 MHz, then 802.11n wireless devices are allowed to transmit
data using 40 MHz.
Captive Profile: Enable or disable captive profile for user authentication.
D-Link DAP-3662 User Manual

Wireless Settings

Access Point Mode

17