Wpa-Enterprise Authentication - D-Link DAP-3662 User Manual

Section 3 - Configuration
When WPA-Enterprise is selected, you must also select a WPA mode from
WPA Mode:
the drop-down menu: AUTO (WPA or WPA2), WPA2 Only, or WPA Only.
WPA and WPA2 use different algorithms. AUTO (WPA or WPA2) allows you
to use both WPA and WPA2.
Cipher Type: When WPA-Enterprise is selected, you must also select a cipher type from
the drop-down menu: Auto, AES, or TKIP.
Group Key Update Select the interval during which the group key will be valid. The
Interval: recommended value is 1800, as a lower interval may reduce data transfer
rates.
Network Access Enable or disable Microsoft Network Access Protection. Enabling this
Protection: will make the DAP-3662 a NAP enforcement point if you are running the
Network Policy Server (NPS) service in Windows Server 2008.
RADIUS Server:
Enter the IP address of the RADIUS server. Click External if the RADIUS
server is on your network or Internal if you are using the RADIUS server on
the DAP-3662.
RADIUS Port:
Enter the RADIUS port (1812 is the default).
RADIUS Secret:
Enter the RADIUS secret.
Accounting Mode:
Select if you want to use a different server for accounting.
Accounting Server:
Enter the IP address of the Accounting server.
Accounting Port:
Enter the Accounting port (1813 is the default).
Accounting Secret:
Enter the Accounting secret.
Note: You can input the secondary RADIUS server and accounting server settings if you have a backup RADIUS and accounting server.
D-Link DAP-3662 User Manual

WPA-Enterprise Authentication

26