Lan - D-Link DAP-3662 User Manual

Section 3 - Configuration
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DAP-3662. These
settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network
and cannot be seen on the Internet. After completing the desired LAN settings, click the Save button to let your changes take effect.
Get IP From: Select Static IP (Manual) if you do not have a DHCP
server on your network, or if you wish to assign a static
IP address to the DAP-3662. When Dynamic IP (DHCP)
is selected, the other fields here will be grayed out.
Please allow about 2 minutes for the DHCP client to be
functional once this selection is made.
The default IP address is 192.168.0.50. Assign a static
IP Address:
IP address that is within the IP address range of your
network.
Subnet Mask: Enter the subnet mask. All devices in the network must
share the same subnet mask.
Default Enter the IP address of the gateway in your network. If
Gateway:
there is a router/gateway in your network, please enter
its IP address.
DNS: Enter a DNS server IP address of your choice. In most
cases, enter the LAN IP of your router.
D-Link DAP-3662 User Manual

LAN

28