Wds With Ap Mode - D-Link DAP-3662 User Manual

Section 3 - Configuration
In WDS with AP mode, the DAP-3662 wirelessly connects multiple networks while still functioning as a wireless AP. After completing the desired
settings, click the Save button to let your changes take effect.
Select either 2.4 GHz or 5 GHz from the drop-down menu.
Wireless Band:
Mode: Select WDS with AP mode from the drop-down menu.
Network Name Service Set Identifier (SSID) is the name designated for a
(SSID): specific wireless local area network (WLAN). The SSID's
factory default setting is dlink. The SSID can easily be
changed to connect to an existing wireless network or to
establish a new wireless network. The SSID can be up to 32
characters and is case-sensitive.
SSID Visibility: Enable or Disable SSID visibility. Enabling this feature
broadcasts the SSID across the network, thus making it
visible to all network users.
Auto Channel
Enabling this feature automatically selects the channel that
Selection: provides the best wireless performance. Enable is set by
default. The channel selection process only occurs when
the AP is booting up.
Channel:
All devices on the network must share the same channel. To
change the channel, first toggle the Auto Channel Selection
setting to Disable, and then use the drop-down menu to
make the desired selection. Note: The wireless adapters will
automatically scan and match the wireless settings.
Channel Width: Allows selection of the channel width you would like to
operate in. 20 MHz and Auto 20/40 MHz allow both
802.11n and non-802.11n wireless devices on your network
when the wireless mode is Mixed 802.11 b/g/n in 2.4G and
Mixed 802.11 a/n in 5G. When the channel width is set to
Auto 20/40 MHz, then 802.11n wireless devices are allowed
to transmit data using 40 MHz.
Captive Profile: Enable or disable captive profile for user authentication.
D-Link DAP-3662 User Manual

WDS with AP Mode

19