Static Pool Setting - D-Link DAP-3662 User Manual

Section 3 - Configuration
The DHCP address pool defines the range of IP addresses that can be assigned to stations on the network. A static pool allows specific wireless
stations to receive a fixed IP without time control. Once a user is finished, click the Save button to let the changes take effect.
Function Enable/ Dynamic Host Configuration Protocol (DHCP) assigns IP
Disable: addresses to wireless devices on the network. This protocol
simplifies network management and allows new wireless
devices to receive IP addresses automatically without the need
to manually assign IP addresses. Select Enable to allow the
DAP-3662 to function as a DHCP server.
Host Name: Enter the name of the host computer in this text box.
Assigned IP: Use the Static Pool Settings to assign the same IP address to
a device every time you start up. The IP addresses assigned in
the Static Pool list must NOT be in the same IP range as the
Dynamic Pool. After you have assigned a static IP address to a
device via its MAC address, click Save; the device will appear
in the Assigned Static Pool at the bottom of the window. You
can edit or delete the device in this list.
Assigned MAC Enter the MAC address of the device requesting association
Address: here.
Subnet Mask: Define the subnet mask of the IP address specified in the "IP Assigned From" field.
Gateway: Specify the Gateway address for the wireless network.
WINS: Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines the IP
address of a network computer with a dynamically assigned IP address, if applicable.
DNS: Enter the Domain Name System (DNS) server address for the wireless network. The DNS server translates domain names such as www.
dlink.com into IP addresses.
Domain Name: Specify the domain name for the network.
D-Link DAP-3662 User Manual

Static Pool Setting

63