Ipv6 - D-Link DAP-3662 User Manual

Section 3 - Configuration
The IPv6 function allows you access DAP-3662 using an IPv6 address.
Enable IPv6: Check this box to enable IPv6.
Select either Static to enter your own IP address or Auto
Get IP From:
to be automatically assigned by a DHCP server or IPv6
gateway.
IP Address: Assign an IPv6 IP address.
Prefix: The Prefix is used to determine what subnet an IP address
belongs to. It must be 0~128..
Dafault Enter the default gateway address. This is usually the IP
Gateway: address of your router.
Note: If IPv6 is enabled, AP Array, QoS, and Traffic Manager will all be disabled.
Also, AP Client mode will change to AP mode.
D-Link DAP-3662 User Manual

IPv6

29