Wireless Resource Control - D-Link DAP-3662 User Manual

Section 3 - Configuration
The Wireless Resource Control window is used to configure the wireless connection settings so that the device can detect the better wireless
connection in your environment.
Wireless band: Select 2.4 GHz or 5 GHz.
Band Steering: Use the drop-down menu to Enable the 5G Preferred
function. When the wireless clients support both
2.4 GHz and 5 GHz and the 2.4 GHz signal is not
strong enough, the device will use 5G as higher
priority.
Band Steering Age: Enter the time in seconds to specify the interval of
updating information.
Band Steering The 5G preferred difference value is equal to the
Difference: number of 5 GHz wireless client connections minus
the number of 2.4 GHz wireless client connections.
If the number of 5 GHz wireless client connections
minus the number of 2.4 GHz wireless client connec-
tions exceed this value, the extra 5 GHz wireless client
connections will be forced to connect to the 2.4 GHz
band and not the 5 GHz band.
Band Steering Enter the maximum 5G connection attempts allowed before the 5G preferred function will be disabled for the wireless
Refuse Number: station connection.
Select Enable or Disable. This is an option for load balancing. This determines whether to limit the number of users
Connection Limit:
accessing this device. The exact number is entered in the User Limit field below. This feature allows the user to share the
wireless network traffic and the client using multiple APs. If this function is enabled and when the number of users ex-
ceeds this value, or the network utilization of this AP exceeds the percentage that has been specified, the DAP-3662 will
not allow clients to associate with the AP.
User Limit: Set the maximum amount of users that are allowed access (zero to 64 users) to the device using the specified wireless
band. The default setting is 20.
D-Link DAP-3662 User Manual

Wireless Resource Control

32