Table of Contents
Advertisement
Transformer operations
Running your locomotive with a Lionel transformer
Place your locomotive on Lionel or Lionel-compatible
1
1
O gauge track.
Power up your locomotive with your transformer.
2
2
Your locomotive is designed to operate on 8-18 volts alternating
current. Virtually all Lionel and Lionel-compatible alternating-current
transformers are suitable.
Do not power your locomotive with direct current (DC). Damage to
Caution!
sensitive electronic components may occur.
Move 'em out!
3
3
Get your locomotive moving. Press the DIRECTION button on your Lionel
transformer. This sequences the reverse unit to the next operating state in the
repeating sequence: forward, neutral, reverse, and neutral.
Adjust track voltage until your locomotive moves at your desired speed. To
increase speed, increase track voltage. To decrease speed, reduce voltage. To stop the
locomotive, turn-off track power.
See page 5 for information on locking your locomotive into a single
operational state.
4
Advertisement
Table of Contents
