Locomotive Switch Locations - Lionel Genset Diesel Locomotive Owner's Manual

Locomotive basics

Locomotive switch locations

T
he functions of your locomotive's switches are outlined below. Refer to Figure 4 for the location
of the switches. The instructions below are specific to this particular locomo-
tive; note that available features (and switches) may differ from other loco-
motives and locomotive sets.
Smoke Unit Switch (SMK/NO SMK)
Used to turn the smoke unit function on and off.
Program-Run Switch (RUN/PGM)
Used to assign an ID# and to reprogram the locomotive for LEGACY and Command operation
when the switch is in the PGM position. Also used to "lock" your powered locomotive in a single
direction, or neutral, in conventional operation when the switch is placed in the PGM position.
Odyssey II Speed Control System Switch (ODY)
Used to turn the Odyssey II Speed Control System on and off.
FRONT
Smoke unit
On/Off switch
Figure 4. Locomotive switch locations
Odyssey II
On/Off switch
Command
reverse
unit switch
Side hatch
8
Volume control knob
- +