CrimeStopper RS-1300.DP Operating Instructions Manual page 8

Crimestopper rs-1300.dp car-accessory: operating instruction
Table of Contents

Advertisement

SELECTABLE HOURLY COLD-START MODE – EXITING THE VEHICLE:
1) Engine should be running with the Key. Press the Remote Start button for at least 1 second. (For RS-1300DP
model, activate Green start input wire.) Lights will turn on signaling the remote start has turned on and doors will
unlock.
2) Within 10 seconds press and release the valet/program button once for each hourly increment (1 time = 1hour,
2X = 2 hours, 3X = every 3 hours, 4X = every 4 hours).
3) Parking Lights will turn when the button is pressed and flash for each consecutive button press.
4) Turn Ignition switch OFF, remove key and exit the vehicle. Engine should remain running.
5) Once outside the vehicle, press and release the remote start button to turn off engine. (For RS-1300DP model,
activate Green Start input wire.) The parking lights will flash the number of times indicating the hourly increment
for confirmation.
6) The vehicle will start by itself at the selected hourly increment until driven with key or started via the remote
control.
EACH PRESS IS 1 HOUR
INCREMENTS, UP TO 4
HOURS
REMOTE ENGINE CONTROL
PRESS FOR 1 SECOND
OR
DOUBLE PRESS
IGN
OFF
8
PARKING LIGHT TURN ON
UNLOCK

Advertisement

Table of Contents
loading

Table of Contents