Replacing The Fca Pc Board - NAMCO GUN SURVIVOR 2 Operator's Manual

7-7

Replacing the FCA PC Board

1. Separate the Gun Cabinet from the Monitor Cabinet.
2. Disconnect the connectors on the FCA PC Board.
3. Remove 4off pozi flange screws (M5x12) and remove the FCA PC Board.
Gun Cabinet
4. Reassemble in reverse order.
Pozi flange screw (M5x12)
FCA PC Board
Connector
Pozi flange screw (M5x12)
Page 74
(see 5-1 page 35)
Connectors