Fitting The Seat Assy To The Monitor Cabinet - NAMCO GUN SURVIVOR 2 Operator's Manual

5-1

Fitting the Seat Assy to the Monitor Cabinet

1. Fit the Joint Brackets, finger tight, to the Gun Cabinet with 2off(ea) hex head
screw (M10x30)
Joint Bracket
Hex head screw (M10x30)
2. Place the Gun Cabinet up to the Monitor Cabinet and connect the
connectors.
3. Fit 2off (ea) hex head screws (M10x30) to retain the Joint Brackets to the
Monitor Cabinet.
4. Tighten fully all hex head screws (M10x30)
Joint Bracket
Hex head screw (M10x30)
Gun Cabinet
Page 35
Gun Cabinet
Joint Bracket
Hex head screw (M10x30)
Joint Bracket
Monitor Cabinet
Connectors