Monitor Adjustment; Monitor Remote Adjustment Board - NAMCO LUCKY & WILD Manual

5-7 Monitor Adjustment

The monitor remote adjustment conuol is located by opening the control panel.
0
0
ROW. LEFTTO RIGKT
TOP
VR 103 -VERTICAL POSITION
VR 102 - BLACK LEVEL
VR 101 -CONTRAST
Illustration 5-8, MONITOR REMOTE ADJUSTMBNT BOARD
5-7-I Cross Hatch Pattern
To center cross hatch pattern:
l
5-7-2 Cross Hatch Pattern with White Block Adjust
White block adjusmrent should not be necessary-just insure that the
block is centered in the cmss hatch, and is white. If not, call a qualified
Service Technician.
Color Bar Test
5-7-3
Color should not need adjusting, but if the white fade test (the bottom
white bar) is tinted an off color, adjustment can be made with the
appropriate color gun adjustment on the CRT neck board, i.e. RED -
performed by a qualified Service Technician.
VR 102
VR 103
VR 105
VR 106
Use VR 103 (V-POS) to adjust cross hatch UP or DOWN.
Use VR 106 (H-PO.?) to adjust cross hatch LEFT or RIGHT.
WARNING - HIGH VOLTAGE
VR 101
VR 104
0
BOTTOM ROW - LEFTTO RIGHT
VR 106. HORIZONTAL POSITION
VR 105 VERTICAL HOLD
VR 104 - VERTICAL SIZE