Communicator Settings - Magellan MG-6060 Programming Manual

[103] Wireless Transmitter Supervision Zone Options *
Option
[1] Zone 1 supervision
[2] Zone 2 supervision
[3] Zone 3 supervision
[4] Zone 4 supervision
[5] Zone 5 supervision
[6] Zone 6 supervision
[7] Zone 7 supervision
[8] Zone 8 supervision
[104] Wireless Transmitter Supervision Zone Options *
Option
[1] Zone 9 supervision
[2] Zone 10 supervision
[3] Zone 11 supervision
[4] Zone 12 supervision
[5] Zone 13 supervision
[6] Zone 14 supervision
[7] Zone 15 supervision
[8] Zone 16 supervision
* For UL installations, all programmed wireless zones must be supervised. For any wireless Fire zones in UL installations, the supervision option must be
enabled (section [094] options [6] & [7]) and the check-in supervision time must be set at 80 minutes (section [096] option [7]).

Communicator Settings

Section Data
____/____/____
[105]
____/____/____
[106]
____/____/____/____
[107]
____/____/____/____
[108]
____/____/____/____
[109]
[110]
[111]
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[112]
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[113]
_
__/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[114]
_
__/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[118]
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[119]
_
__/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
* Using Magellan's speakerphone feature (MG-6060 only), the Service telephone number allows the user to directly call the installer or maintenance staff if any problems arise.
† If you are using any report format other than SIA in sections [105] and [106] and you would like to transmit an "A", press [0] on the main keypad; if you would like to enter a
space (non-reportable digit), press the [1] key on the center keypad.
8
Description
Report format for monitoring station telephone number 1 (
Report format for monitoring station telephone number 2 (
001 = Ademco slow (1400Hz 10BPS)
004 = Ademco Contact ID (default)
Account number (
[4] [3]
) †
Panel identifier (for use with WinLoad software) (
Panel password (for use with WinLoad software) (
Reserved for future use
Monitoring station telephone number 1 (32 digits maximum; if less than 32, press [ok] to accept)
Monitoring station telephone number 2 (32 digits maximum; if less than 32, press [ok] to accept)
Pager Telephone # (32 digits maximum; if less than 32, press [ok] to accept)
Numeric message sent with Pager Reporting (32 digits maximum; if less than 32, press [ok] to accept)
PC telephone number for WinLoad (32 digits maximum; if less than 32, press [ok] to accept)
Service telephone number* (32 digits maximum; if less than 32, press [ok] to accept)
OFF
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
OFF
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
[4] [3] )
[4] [3] )
002 = Silent Knight (1400Hz 20BPS)
005 = SIA FSK
[4] [8] )
[4] [8] )
Bold = Default setting
ON
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Bold = Default setting
ON
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
003 = SESCOA (2300Hz 20BPS)
006 = ADEMCO Express (DTMF 4+2)
[4] [3]
( )
( [4] [3] )
( [4] [3] )
[4]
(
(MG-6060 only)
[4] [3]
( )
Programming Guide
[3]
)