Configuring The Cordless Terminal; Configuring The Bluetooth ® Terminal - NEC DTL-12BT-1 series User Manual

Configuring the Cordless Terminal

Configuring the Bluetooth
Start configuring Bluetooth
The following operation is an example. Display content may vary depending on
Caution
connected terminal and your system.
・Press the Menu button. → Accept [3. Settings] → Accept [5. Peripherals] → Accept [1.
Bluetooth].
The table below lists the setting of each setup item.
Menu display
Pairing Pairing
Mode
PIN Code
®
Terminal
® device from the Bluetooth
Setting
([ ] default)
- Up to 8 Bluetooth
Bluetooth
headset you want to pair with the multifunctional
terminal.
For more details, see "Pairing with a Bluetooth
Headset" (P.1-36).
4 to 16 Before pairing, you need to set the PIN Code of
digits the Bluetooth
[0000] headset.
When pairing with a Bluetooth
PIN Code other than 0000, enter a string of 4 to
16 digits to suit that device.
For more details, see "Pairing with a Bluetooth
Headset" (P.1-36).
*The PIN Code is a password that is exchanged
between Bluetooth
launching a session of communication between
them.

Configuring the Cordless Terminal

® terminal setup menu.
Explanation
® devices are located around the
® terminal, among which select a
® terminal and the Bluetooth
® devices preparatory to
®
®
headset that has a
®
®
1 - 25