User Safety Protocol - NEC DTL-12BT-1 series User Manual

Cordless terminal
Table of Contents

Advertisement

Important:Read this information before using your DTL-12BT-1( )( ) TEL and BCH-L
( )( ) UNIT.
Read the following instructions to use this product safely and to prevent you and other people
from possible injury, and to protect properties. Improper handling may cause overheating,
explosion, and fire.
Danger
Recharge the battery with the matching battery charger only (see battery label description).
Use the battery only for this DTL-12BT-1( )( ) TEL and BCH-L( )( ) UNIT system. Do
not use it with other electrical devices.
Heed the following warnings to prevent the battery pack from overheating, explosion, and
fire.
・Do not throw the battery pack into a fire.
・Do not solder the battery pack directly.
・Do not short the positive (+) and negative (-) terminal of the battery pack with metal.
・Do not poke the battery or smash it with a hammer.
Do not disassemble or modify the battery pack. It has a safety circuit and a damaged
circuit may cause overheating, explosion, and a fire.
The internal liquid of the battery pack has strong acid. If the battery liquid gets into your
eye, rinse your eye well with water and consult with a doctor.
Do not use, leave, or recharge the battery pack near fire or under the direct sunlight. High
temperature may damage the internal safety circuit and may cause malfunction of the
recharge, overheating, explosion, or fire.

User Safety Protocol

User Safety Protocol
iii

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bch-l series

Table of Contents