Hitachi CP-WU5500 User Manual page 26

STACK menu settings
3.7 Important information for Intellectual Stack
● The Main and Sub projectors have the following common settings.
- Muting feature
- Magnifying feature
- ASPECT and OVER SCAN
- COMPUTER IN
- OSD MESSEAGE
- MY BUTTON
- TEMPLATE (Operating Guide
- SHADE (Operating Guide
- SHADE TIMER
- PbyP/PinP (Operating Guide
● The following functions are disabled.
- STANDBY MODE
- AUTO SEARCH
- DIRECT POWER ON
- AUTO POWER OFF
- COMMUNICATION TYPE
→ COMMUNICATION)
- SOURCE SKIP
● LAN port cannot be selected.
● When the projectors are in the PbyP/PinP mode, the SUB INPUT SOURCE is
fixed at FOLLOW MAIN UNIT.
● When Intellectual Stack is in use, an error message will be displayed if an error
occurs on any of the projectors.
When an error occurs, a full dialog will be displayed on screen. The full dialog
changes to a small dialog after about 20 seconds without any key activity. While
the small dialog is displayed, pressing the ◄ button displays a full dialog again.
The numbers "1" and "2" above the projector icons represent the Main and Sub
projectors respectively.
Refer to the on-screen messages as shown below
and take the necessary actions to resolve the
problem.
(continued on next page)
26
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
→
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(continued)
→ Temporarily muting the
→ Using the magnify
→ INPUT menu)
→
SETUP
→ OPTION menu)
→ SCREEN menu)
Temporarily shading the
→ OPTION
→ PbyP/PinP)
→ SETUP
→ OPTION
→ OPTION
→ OPTION
→
→
OPTION
sound)
feature)
→
IMAGE menu)
menu)
screen)
menu)
menu)
menu)
menu)
menu)
OPTION menu
menu)
Full dialog
→
SERVICE
Small dialog