Inputting Image To Sub And Main Individually - Hitachi CP-WU5500 User Manual

Connecting cables
4.2 Connecting signal cables
Using HDMI OUT port
1.
Connect the HDMI OUT port on Main to
the HDMI 1 / MHL port on Sub with a HDMI
cable.
2.
Connect the image output device to HDMI
1 / MHL or HDBaseT ports on Main.

Inputting image to Sub and Main individually

1.
Split the output signal from your image device into two with device such as a
signal splitter.
2.
Connect the output ports of the image output device to the same input ports
on the Main and Sub projectors.
NOTES for Intellectual Stack • LAN cannot be used as the input port on
the Main projector in Intellectual Stack.
NOTES for Simple Stack • Any of the ports that is compatible with the
signal can be used. Input the same signal to the two projectors individually.
30
(continued)
HDBaseT
Main
Sub
Connection example
in Intellectual Stack