Installation; Preparing For Intellectual Stack - Hitachi CP-WU5500 User Manual

2. Installation

For safety reasons, read
before installation. In addition, take note of the followings for proper use of Instant
Stack.
● Use the same model projectors.
● To avoid incorrect operations with the remote control, it is recommended to
operate with the control panel or a wired remote control if you control one
projector with the remote control during installation. KEY LOCK or REMOTE ID *
function is also available.
● Images from Set A and Set B may superimpose well but the image positions
can shift over time. Readjust to superimpose the images.
* Available only in optional remote control.

2.1 Preparing for Intellectual Stack

When using Intellectual Stack via RS-232C connection, ensure the following set-
tings are set on the two projectors. Otherwise, the Intellectual Stack menu cannot
be operated.
● STANDBY MODE in SETUP menu: NORMAL
(Operating Guide
● COMMUNICATION TYPE under COMMUNICATION in SERVICE menu: OFF
(Operating Guide
● STACK LOCK in SECURITY menu: OFF
When STACK LOCK is set to on, menus related to Instant Stack cannot be operated.
It is therefore necessary to set it to off during installation and menu setting.
(1) Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > SECURITY (> ENTER PASSWORD) > STACK LOCK
STACK LOCK dialog will appear on screen.
Guide → SECURITY
(2) Use the ▲/▼ buttons to highlight OFF, and press the ►
button to complete the setting.
6
1.1 Basic information and preparations
(Operating Guide
→ SETUP menu)
→ OPTION menu)
menu)
→ OPTION menu)
(Operating
( 3, 4 ) carefully