Appendix; Overview; Vt Pro Project - Crestron STX-1600C Operation Manual

Appendix

24 • Series STX Touchpanels
CRESTRON
The purpose of this Appendix is to provide a programming solution for those that
prefer the last screen to be displayed when the touchpanel turns on after
encountering a POWER DOWN TIMEOUT. Stated simply, an INTERLOCK
symbol needs to be incorporated so that the control system flips to the last page
rather than the page marked as first. The information in this Appendix is not meant
for everyone; only those who wish to adopt this feature.

Overview

This Appendix offers a simple example of a control system that has three devices to
control: TV, VCR, and projector. As such, the VT Pro project includes three pages,
one for each device. Particular settings must be made on each device page to ensure
proper functionality. To support the goal of having the last page appear, the SIMPL-
I program needs to be adjusted via SIMPL Windows. This Appendix provides a
SIMPL block diagram and description to characterize the details of the adjustment.

VT Pro Project

NOTE: The control logic for these devices is omitted for the sake of clarity.
NOTE: It is assumed that the reader has a working knowledge of VT Pro. If any of
the terms in this discussion are unfamiliar, please review VT Pro's on-line help
contents.
The VT Pro project in this example contains three device pages: TV, VCR, and
PROJECTOR, shown below.
Three Device Pages in the VT Pro Project
Operations Guide - DOC. 5716A