Crestron STX-1600C Operation Manual page 22

CRESTRON
Network System View of ST-VC in SIMPL Windows' Configuration Manager
Next, add the STX-1600C to the system. Click once on the CNRGWX icon in the
Network System View to add the "RFX Address" window to the Detail System View.
Drag and drop the STX-1600C icon from the Device Library to the desired RFX
Address (0A in this example, as shown below).
"RFX Address" Window
Programming Manager
Use the Programming Manager workspace (Project | Program System) in SIMPL
Windows to select symbols and assign their respective signals. For this example, a
two-way wireless touchpanel and ST-VC symbol were added automatically when the
devices were added to the system in the Configuration Manager workspace. Expand
the Network Modules folder and double click on the CNRFGWX and then on the
touchpanel for a detail view (alternatively CTRL+D or drag and drop into Detail
View). Assign digital, analog, and serial signals to the touchpanel as shown after this
paragraph.
Detail View of Digital Signals for the STX-1600C in SIMPL Windows' Programming
Manager
18 • Series STX Touchpanels
Operations Guide - DOC. 5716A