Preferences Menu - Crestron ST-1550 User's Operation Manual

Crestron ST-1550 & ST-1550C
User's Operations Guide - DOC. 5804
appear. The Opening Screen appears when the finger is removed from
the touchscreen.
3. Touch the Opening Screen and select the Calibration button from the
Preferences and Settings Menu to enter "calibration mode".

Preferences Menu

To obtain the Preferences Menu, shown after this paragraph, touch the Preferences
button from the Preferences and Settings Menu. Many options for setting parameters
of the touchpanel are available from the Preferences Menu and are explained in the
following paragraphs. After these parameters have been set, select the Return
button, located at the bottom of the Preferences Menu.
Preferences Menu
Battery Life Screen
NOTE: Detach the external AC power pack when viewing Battery Life Screen. If
this pack is attached, the gauges read full charge which may be misleading.
To obtain the Battery Life Screen, shown after this paragraph, touch the Battery Life
button from the Preferences Menu. This screen indicates the amount of charge (or
life) remaining in the batteries, if batteries are installed. A digital and analog gauge is
provided. The digital gauge, located on the left side of the screen, indicates five
levels of charge: 0%, 25%, 50%, 75%, and 100%. The illustration below shows that
the battery life is at the 0% level. The analog gauge, located on the right side of the
screen, indicates smaller and continuous incremental levels of charge. The analog bar
fills to the appropriate level of charge. Touch the Return button to display the
Preferences Menu.
Battery Life Screen
SmarTouch STS Touchpanels
SmarTouch STS • 5