Advanced Settings - Crestron ST-1550 User's Operation Manual

SmarTouch STS Touchpanels
8 • SmarTouch STS
be lengthened by turning off the backlight when the touchpanel is inactive. The
length of touchpanel inactivity can be specified to minimize power utilization.
Timeout Screen for ST-1550C (left) and ST-1550 (right)
Standby Timeout is displayed in the top left corner of the Timeout Screen. This
setting turns the display and backlight off when the touchpanel is inactive for the
specified time. When the touchpanel is activated, the last screen to be displayed
reappears. The specified time is displayed in minutes. A two minute Standby
Timeout is shown in the illustration. Minutes can vary from 0 to 120, where 0
disables the timeout. Down and up arrow buttons decrease and increase the timeout,
respectively.
Power Down Timeout is displayed in the top right corner of the Timeout Screen.
This setting turns off all power when the touchpanel is inactive for the specified
time. When the touchpanel is activated, the first page of the project appears or the
last screen to be displayed reappears. Selection depends on how your dealer setup
your custom program. The specified time is displayed in minutes. A 10 minute
Power Down Timeout is shown in the illustration. Minutes can vary from 0 to 120,
where 0 disables the timeout. Down and up arrow buttons decrease and increase the
timeout, respectively.
NOTE: Power Down Timeout should be set low to maximize battery life. However,
Power Down Timeout should be set greater than Standby Timeout. Otherwise, the
Standby Timeout is meaningless.
NOTE: If the external AC power pack is attached to the touchpanel and plugged
into an active AC receptacle or if the touchpanel is resting in the docking station
(ST-DS) and plugged into an active AC receptacle, the panel does not power down
when the power down timeout is achieved. Recall that the purpose of the this timeout
is to maximize battery life. Standby timeout still functions.
After timeout parameters have been set, touch the SAVE TIMEOUTS button in the
lower left corner of the ST-1550C to save the new settings. Touch the RETURN
button, located in the bottom right corner of the screen, to display the Preferences
and Settings Menu. For the ST-1550, simply touch the SAVE TIMEOUTS and
RETURN button.

Advanced Settings

The Advanced Settings button from the Preferences and Settings Menu should only
be used under supervision from the dealer that provided your system. The options
available from the Advanced Settings Screen, shown on the next page, are beyond
the scope of this guide.
Crestron ST-1550 & ST-1550C
User's Operations Guide - DOC. 5804