Setting Digital And Analog Audio Output (Output Selection) - Pioneer AVH-P7490DVD Owner's Manual

Setting Digital and Analog Audio Output (OUTPUT SELECTION)

You can set linear PCM audio output for both digital and analog output. Set audio output
correctly to match the components you are using with this unit.
With this system, select the "48 kHz" setting. If you select the "96 kHz" setting, no sound will
be output when playing discs featuring 96 kHz recordings.
Precaution:
• If the setting is incorrect there will be no sound.
1. Move the joystick up/down to select the
"OUTPUT SELECTION" in the second
SET UP MENU.
"OUTPUT SELECTION" is indicated in blue.
(For details, see page 115.)
2. Click the joystick.
Audio output setting menu is displayed.
3. Move the joystick up/down to select the
desired audio output setting.
The currently set audio output setting is indicated the
mark " ". The audio output setting selected with the
joystick is indicated in blue.
Output setting
48kHz
96kHz
4. Click the joystick.
The selected audio output setting is set.
Note:
• With discs featuring 96 kHz recording, if you select the "96kHz" setting, audio is not output
from digital output.
• With discs do not feature a CSS (Content Scrambling System) copy guard signal, a 96 kHz
digital signal is output.
• Pressing the RETURN button takes you back to the previous display.
127
Setting detail
Select this setting when using digital connections.
A 48 kHz signal is output regardless of the audio sampling frequency.
A 96 kHz signal is converted to a 48 kHz signal. (Initial setting)
Select this setting when using analog connections.
The signal is output with the same frequency as the audio sampling
frequency. With a 96 kHz signal, you can enjoy exceptionally high
sound quality.