Scan Play; Its Play - Pioneer AVH-P7490DVD Owner's Manual

Scan Play

In the Disc Repeat, the beginning of each track on the selected disc is scanned for about 10
seconds. In the Multi-CD player Repeat, the beginning of the first track on each disc is
scanned for about 10 seconds.
1. Select "Scan" by moving the joystick.
"Scan" is highlighted in green.
2. Switch the Scan Play ON by clicking the joy-
stick.
After selecting the desired repeat play range from those
referred to in "Repeat Play" on page 59, switch Multi-
CD Player Scan Play ON.
3. When you find the desired track (or disc), can-
cel the Scan Play by clicking the joystick.
If the Function Menu has been canceled automatically,
select the "Scan" in the Function Menu again.
Display
DISC SCAN
MULTI SCAN
Note:
• Scan Play is canceled automatically after all the tracks or discs have been scanned.
• One-track Repeat changes to the Disc Repeat when you switch the Scan Play ON.

ITS Play

ITS Play plays the memorized track. (Refer to "ITS Programming (ITS)" on page 65.) ITS
play of tracks is performed within the play range explained in the "Repeat Play" section.
1. Select "ITS" by moving the joystick.
"ITS" is highlighted in green.
2. Click the joystick.
Each click toggles ITS play On/Off.
After selecting the desired repeat play range from those
referred to in "Repeat Play" on page 59, switch ITS
Play ON.
Note:
• If no track in the current range is programmed for ITS Play,
"Empty" is displayed.
Source plate
Play range
Disc Repeat
Multi-CD player Repeat
Source plate
Scan Play range
ITS Play
Continued overleaf.
60