Table of Contents
Advertisement
System settings
Refer to Displaying the "System" setting screen on page
31
2 Touch [Steering Wheel Control].
3 Touch [W/o Adapter].
4 Touch the item to select the brand of your
vehicle.
5 Touch the item to set.
Follow the on-screen instructions to register the function setting.
If you touch [Clear], all the settings is cleared.
Setting Bluetooth audio source
activation
X5890BT
X2890BT
The default setting is "On".
1 Display the "System" setting screen.
Refer to Displaying the "System" setting screen on page
31
2 Touch [AV Source Settings].
3 Touch [Bluetooth Audio] to switch "On" or
"Off".
Setting the ever scroll
When "Ever Scroll" is set to "On", the recorded text information
scrolls continuously in the display while the vehicle is stopped.
The default setting is "Off".
1 Display the "System" setting screen.
Refer to Displaying the "System" setting screen on page
31
2 Touch [Ever Scroll] to switch "On" or "Off".
Setting the beep tone
The default setting is "On".
1 Display the "System" setting screen.
Refer to Displaying the "System" setting screen on page
31
2 Touch [Beep Tone] to switch "On" or "Off".
32
Setting the auto audio mix
function
You can select whether or not to use the auto audio mix function.
The default setting is "On".
1 Display the "System" setting screen.
Refer to Displaying the "System" setting screen on page
31
2 Touch [Auto Mix] to switch "On" or "Off".
Setting the rear view camera
A separately sold rear view camera (e.g. ND-BC8) is required
for utilising the rear view camera function. (For details, consult
your dealer.)
Rear view camera
This product features a function that automatically switches to
the full-screen image of the rear view camera installed on your
vehicle, when the gearstick is in the REVERSE (R) position.
Camera for Camera View mode
Camera View mode also allows you to check what is behind you
while driving.
To display the camera image, touch [Camera View] on the "AV
source selection" screen.
Refer to Source on the AV source selection screen on page
10
p To set the rear view camera as the camera for Camera View
mode, set "Back Camera Input" to "On".
Refer to Setting rear view camera activation on page 32
CAUTION
Pioneer recommends the use of a camera which outputs
mirror reversed images, otherwise the screen image may
appear reversed.
p Immediately verify whether the display changes to a
rear view camera image when the gearstick is moved to
REVERSE (R) from another position.
p When the screen changes to full-screen rear view camera
image during normal driving, switch to the opposite setting
in "Camera Polarity".
p If you touch
while the camera image is displayed, the
displayed image will turn off temporarily.
Setting rear view camera activation
The default setting is "Off".
1 Display the "System" setting screen.
Refer to Displaying the "System" setting screen on page
31
2 Touch [Camera settings].
3 Touch [Back Camera Input] to switch "On" or
"Off".
Setting the polarity of the rear view
camera
p This function is available when "Back Camera Input" is
"On".
Refer to Setting rear view camera activation on page 32
1 Display the "System" setting screen.
Refer to Displaying the "System" setting screen on page
31
2 Touch [Camera settings].
3 Touch [Camera Polarity].
Battery (default):
The polarity of the connected lead is positive.
Ground:
The polarity of the connected lead is negative.
Setting the demo mode
The default setting is "On".
1 Display the "System" setting screen.
Refer to Displaying the "System" setting screen on page
31
2 Touch [Demo Mode] to switch "On" or "Off".
Setting the keyboard language
with the application for iPhone
You can use the keyboard in AppRadioMode by setting the
language of the keyboard for iPhone.
p This function is only available in AppRadioMode on the
iPhone.
1 Display the "System" setting screen.
Refer to Displaying the "System" setting screen on page
31
2 Touch [Keyboard].
Advertisement
Table of Contents
