Installing The Dvd Player (Din Rear-Mount) - Pioneer AVH-P7490DVD Owner's Manual

Installing the DVD Player (DIN Rear-mount)

Installation using the screw holes on the side of the unit
1. Remove the frame.
2. Fastening the unit to the factory radio mounting bracket.
Select a position where the screw holes of the bracket and the screw holes of this
product become aligned (are fitted), and tighten the screws at 2 places on each side.
Use any of binding screws (4 × 3 mm), binding screws (5 × 6 mm) or flush surface
screws (5 × 6 mm), depending on the shape of the screw holes in the bracket.
*1 Use binding screws (4 × 3 mm) only.
Factory radio mounting bracket
Frame
Pull out to remove the frame.
(When reattaching the frame, point the
side with a groove downwards and
attach it.)
* 1
* 1
12
Screw
11
Dashboard or Console
13
166