Switching The Video Select Setting; Setting The Automatic Open Mode - Pioneer AVH-P7490DVD Owner's Manual

Switching the Video Select Setting

You can change the video select setting. With this system, you are recommended to select the
"AVM" setting.
1. Press the WIDE button and select the video select mode (VSEL SET) in the
Display Setting Menu.
2. Switch to the desired video select setting in the following order:
AUTO Ô MANUAL Ô AVM
7 AUTO
When the AV Receiver source is switched to a component connected to the AV-BUS,
output automatically switches to video from that component.
7 MANUAL
You can switch between VCR and AV with the V.SOURCE button. (Refer to
page 26.)
7 AVM
This prevents switching from video from a component connected to the RGB input.

Setting the Automatic Open Mode

To prevent the display from hitting the shift lever of an automatic vehicle when it is in the "P"
(park) position, or when you do not wish opening/closing of the display to be carried out auto-
matically, you can switch this function ON/OFF.
1. Press the WIDE button and select the automatic open mode (AUTO OPEN)
in the Display Setting Menu.
2. Switch the automatic open ON/OFF.
130