Operation For Each Source Unit; To Listen To Music - Pioneer AVH-P7490DVD Owner's Manual

Operation for Each Source Unit

To Listen to Music

The following explains the initial operations required before you can listen to music.
Initially, set the remote control's operation mode switch to "AUDIO". (Refer to "Setting the
Remote Control for AV Receiver Operation" on page 19.) Also set the display's video source
to RGB. (Refer to "Switching the Video Source" on page 26.)
1. Select the desired source (e.g. Multi-CD Player).
Each press changes the Source ...
Each press of the SOURCE button selects the desired source in the following order:
DVD Player = TV = VIDEO = Tuner = MD Player = CD Player = Multi-CD
Player = External 1 = External 2 = AUX = Speaker Input
Note:
• External Unit refers to a Pioneer product (such as one available in the future) that, although
incompatible as a source, enables control of basic functions by this product. Two External
Units can be controlled by this product, although "External" is displayed whether you select
External Unit 1 or External Unit 2. When two External Units are connected, the allocation of
them to External Unit 1 or External Unit 2 is automatically set by this product.
• In the following cases, the sound source will not change:
* When the sound source from another product is not connected to this product.
* When no magazine is set in the Multi-CD player.
* When no disc is set in the DVD player.
* When no disc is set in the CD player.
* When no disc is set in the MD player.
* When the AUX (auxiliary input), VIDEO and Speaker Input are set to OFF.
(See pages 134, 135.)
• When this product's blue/white lead is connected to the car's Auto-antenna relay control ter-
minal, the car's Auto-antenna extends when this product's source is switched ON. To retract
the antenna, switch the source OFF.
27