Table of Contents
Advertisement
Quick Links
Mini UHV gate valve
with manual actuator
with pneumatic actuator
This manual is valid for the valve ordering numbers:
01024/28/32/34- . E01/08
01024/28/32/34- . E11/21/31/41
01024/28/32/34- . E12/22/32/42
01024/28/32/34- . E14/24/34/44
The fabrication number is indicated on each product as per the label
below (or similar):
made in Switzerland
Fabrication No.:
patented
010 . . – . . . . – . . . . / . . . .
A – . . . . . .
Explanation of symbols:
Read declaration carefully before you start any other
action!
Attention!
Product is in conformity with EC guidelines,
if applicable!
Disconnect electrical power and compressed air lines.
Do not touch parts under voltage!
Read these «Installation, Operating & Maintenance Instructions» and the enclosed «General
Safety Instructions» carefully before you start any other action!
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com
Installation, Operating, and Maintenance Instructions
Series 01, DN 16 - 50 (5/8" - 2")
. .
Fabrication number
Keep body parts and objects away from the valve
opening!
Hot surfaces; do not touch!
Loaded springs and/or air cushions are potential
hazards!
Wear gloves!
271691EB
2009-03-09
1/15
Advertisement
Table of Contents
Related Manuals for VAT 01 Series
Summary of Contents for VAT 01 Series
- Page 1 Do not touch parts under voltage! Read these «Installation, Operating & Maintenance Instructions» and the enclosed «General Safety Instructions» carefully before you start any other action! VAT Vakuumventile AG, CH-9469 Haag, Switzerland 271691EB 1/15 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com...
- Page 2 VAT products. The VAT firmware contains a limited, time unlimited user license. The VAT firmware may not be used for purposes other than those intended nor is it permitted to make copies of the VAT firmware. In particular, it is strictly forbidden to give copies of the VAT firmware to other people.
-
Page 3: Table Of Contents
5.3 Replacement of position indicator ........................12 6 Drawing ................................... 13 7 Spare parts ................................14 8 Warranty ................................. 15 VAT Vakuumventile AG, CH-9469 Haag, Switzerland 271691EB 3/15 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com... -
Page 4: Use Of Product
Make sure, that the delivered components are according the order. Visually check the quality of the components. If something of the delivery is not as expected please immediately contact VAT. Notice: Please do not throw away the original packaging. Packaging my useful in a case of service to return the components to VAT. -
Page 5: Admissible Forces
30 Nm / 22 lbf . ft Bending moment «M»: If a combination of both forces («FA» and «M») occurs, the values mentioned above are invalid. Please contact VAT for more information. Connections 2.4.1 Compressed air connection Connect compressed air only if... -
Page 6: Electrical Connection
Lo = position indicator «open» Lo = position indicator «open» Lg = position indicator «closed» Lg = position indicator «closed» VAT Vakuumventile AG, CH-9469 Haag, Switzerland 271691EB 6/15 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com... -
Page 7: Operation
(solenoid for impulse actuation - option): valve remains in its position, but a started movement will be completed VAT Vakuumventile AG, CH-9469 Haag, Switzerland 271691EB 7/15 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com... -
Page 8: Emergency Operation At Power Failure
Press push-button on the left: valve opens Release key-button: valve closes Press push-button on the right: valve closes VAT Vakuumventile AG, CH-9469 Haag, Switzerland 271691EB 8/15 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com 2009-03-09... -
Page 9: Trouble Shooting
Contamination from the process may influence the function and requires more frequent maintenance. Before carrying out any maintenance or repairs, please contact VAT. It has to be individually decided whether the maintenance/repair can be performed by the customer or has to be carried out by VAT. The fabrication number on the valve made in Switzerland Fabrication No.:... -
Page 10: Replacement Of Actuator/Gate Assembly
Keep fingers and objects away from the valve opening! Products returned to VAT must be free of harmful substances such as e.g. toxical, caustic or microbiological ones. If products are radioactively contaminated, fill in the VAT form «Contamination and Radiation Report» and send it with the product. -
Page 11: Replacement Of Gate
An incorrect located pin may result in a damage of the valve. Correct assembly Wrong assembly VAT Vakuumventile AG, CH-9469 Haag, Switzerland 271691EB 11/15 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com 2009-03-09... -
Page 12: Replacement Of Position Indicator
Wrong mounting of position indicator, i.e. valve piston is blocked by the position indicator actuator ( see circle marking). In this case, valve cannot be opened. VAT Vakuumventile AG, CH-9469 Haag, Switzerland 271691EB 12/15 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com... -
Page 13: Drawing
Installation, Operating, and Maintenance Instructions Series 01, DN 16 - 50 (5/8" - 2") Drawing VAT Vakuumventile AG, CH-9469 Haag, Switzerland 271691EB 13/15 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com 2009-03-09... -
Page 14: Spare Parts
No. 010 . . - . E34/44 N-7557-021* ..*) Specify voltage! (e. g. N-7557-018-220V 50Hz) VAT Vakuumventile AG, CH-9469 Haag, Switzerland 271691EB 14/15 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com... -
Page 15: Warranty
(including any delay in or failure to deliver), packaging, storage or use of any product sold or delivered by VAT shall fail to conform to the foregoing warranty or to the...