Crestron CT-1000 & LC-1000
Operations Guide – DOC. 5813B
4. Cut out and remove the traced shape of the mounting surface (refer to
illustration after this step).
Removing Template Cut Out
5. Use four pan head screws, supplied, to attach two mounting brackets to
the touchpanel (refer to illustration after this step). Do not tighten
screws. The screw threads should catch the mounting brackets, but not
pass more than 1/16" through to the other side of the opening.
Mounting Bracket/Touchpanel Assembly
6. Attach the CAT 5 cable in the wall to the connector on the back of the
touchpanel. Refer to "Network Wiring" on page 5 for wiring details.
Series 1000 Wall-Mounted Touchpanels • 35
Touchpanels