Crestron CT-1000 Operation Manual page 21

Crestron CT-1000 & LC-1000
Operations Guide – DOC. 5813B
Setting the Net ID in Device Settings
Double-click the LC-1000 icon to open the "Device Settings" window. This window
displays the LC-1000 device information. Select the Net ID tab to change the
touchpanel Net ID, as shown in the following figure.
"Device Settings" Window for the LC-1000
NOTE: SIMPL Windows automatically changes NET ID values of a device added
to a program if a duplicate device or a device with the same default NET ID already
exists in the program. Always ensure that the hardware and software settings of the
NET ID match. For NET ID hardware setting details, refer to "Identity Code" on
page 6.
LC-1000 Symbol in Programming Manager
Programming Manager is where programmers "program" a Creston control system
by assigning signals to symbols. The following diagram shows the LC-1000 symbol
in the SIMPL Windows' Programming Manager.
NOTE: With respect to programming in SIMPL Windows, the CT-1000 symbol is
identical, except for the nomenclature.
Detail View of the LC-1000 in SIMPL Windows' Programming Manager
NOTE: Pin numbers are expandable to 999 Digital, 255 Analog, and 127 Serial.
Series 1000 Wall-Mounted Touchpanels • 17
Touchpanels