Page 2
Install the SD Cloud Connector Edge 540—DHCP Perform the following steps to install the Symantec SD Cloud Connector (SDCC) Edge 540 in a basic configuration and obtain an IP address through DHCP. STEP 1—Connect the Edge to an available Internet connection: •...
Page 3
7. Click Save Changes to apply the settings. 8. When prompted, enter the default username and password: admin/admin Note: After following these instructions, if you are still unable to activate the Symantec SD Cloud Connector Edge 540, first contact your reseller. Symantec Support is available here:...
Need help?
Do you have a question about the Edge 540 and is the answer not in the manual?
Questions and answers