Page 1
Spring Washer Head Cap Bolt 1 pc. 1 pc. 24 pcs. (+1 extra) 24 pcs. (+1 extra) Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
Page 2
Assembly Instructions 2/4 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly.
Page 3
Assembly Instructions 3/4 STEP 3 Place Top (A) upside down on a soft cloth. Attach unit to Top (A) with Spring Washers and Head Cap Bolts, tightening bolts only halfway. (See Figure 2) Tighten all Head Cap Bolts used in all steps. Figure 2 Spring Washer Head Cap Bolt...
Assembly Instructions 4/4 IMPORTANT To help reduce the risk of the unit tipping over, the Tip-over Restraint must be installed following these instructions exactly. STEP 5 Anchor in wall Wall Screw Machine Screw Bracket on wall Place unit at desired location. Pre-drilled hole 3/8”...
Page 5
Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at: www.homestyles-furniture.com/customer-service/replacement-parts Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
Need help?
Do you have a question about the 20 05617 0101 and is the answer not in the manual?
Questions and answers