Receipt / Handling; Receipt; Unpacking And Handling; Long Term Storage - Ingersoll-Rand R90 - 160N Operation And Maintenance Manual

6.1 RECEIPT

When you receive the compressor please inspect it closely. Any indication of careless handling by the carrier should be
noted on the delivery receipt especially if the compressor will not be immediately unpacked. Obtaining the delivery
persons signed agreement to any noted damages will facilitate any future insurance claims.

6.2 UNPACKING AND HANDLING

The compressor will normally be delivered with a
polyethylene or other cover. If a knife has to be used to
remove this cover, ensure that the exterior paintwork of
the compressor is not damaged.
Incorporated within the base of the compressor are slots
to enable a fork lift truck to move the machine. Ensure
truck forks are fully engaged on both sides. Alternatively
a special lifting frame can be utilized to enable a crane
or hoist to move the compressor. Use only marked lifting
points.

6.3 LONG TERM STORAGE

If the compressor will not be commissioned within 6
months of receipt, the compressor should be prepared
for long term storage. Please contact your local Ingersoll
Rand distributor for details
1

6.0 RECEIPT / HANDLING

Once the packaging and pallet are discarded and the
unit is in its final position, remove the yellow painted
following transit brackets from the resilient mounts and
store for future use or discard
For VSD
•
•
•
For FS
•
•
•
R90 - 160N / R90 - 160I / R90 - 160NE / R90 - 160IE
http://www.ingersollrandproducts.com
(3) brackets at the separator tank
(1) bracket from the air end discharge elbow.
(1) bracket from the air end support.
(3) brackets at the separator tank
(1) bracket from the air end support.
(1) bracket from the motor mounting bracket.
: