Table of Contents
Advertisement
INSPECTION
When you receive the compressor please inspect it closely.
Any indication of careless handling by the carrier should be
noted on the delivery receipt especially if the compressor will
not be immediately uncrated. Obtaining the delivery man's
signed agreement to any noted damages will facilitate any
future insurance claims.
IMPORTANT
READ THIS
LOST OR DAMAGED GOODS
THOROUGHLY INSPECT THIS SHIPMENT
IMMEDIATELY UPON ARRIVAL
OUR RESPONSIBILITY FOR THIS SHIPMENT
CEASED WHEN THE CARRIER SIGNED
BILL OF LADING
If goods are received short or in damaged condition,
it is important that you notify the carrier and insist on
a notation of the loss or damage across the face of the
freight bill. Otherwise no claim can be enforced against the
transportation company.
If concealed loss or damage is discovered, notify your
carrier at once and request an inspection. This is absolutely
necessary. Unless you do this the carrier will not entertain
any claim for loss or damage. The agent will make an
inspection and grant a concealed damage notation. If you
give the transportation company a clear receipt for goods
that have been damaged or lost in transit, you do so at
your own risk and expense.
WE, AT INGERSOLL RAND, ARE WILLING TO ASSIST YOU IN
EVERY POSSIBLE MANNER TO COLLECT CLAIMS FOR LOSS
OR DAMAGE, BUT THE WILLINGNESS ON OUR PART DOES
NOT MAKE US RESPONSIBLE FOR COLLECTION OF CLAIMS
OR REPLACEMENT OF MATERIAL.
THE ACTUAL FILING AND PROCESSING OF THE CLAIM IS
YOUR RESPONSIBILITY.
Ingersoll Rand Company
Davidson, North Carolina
APDDGFO-99-79
UNPACKING AND HANDLING
The compressor package has been mounted on a base which
provides for forklifting between the two side channels to
facilitate handling during shipment. Care in positioning the
forklifts is important because the location of the center of
gravity is strongly affected by the location of the compression
module and drive motor.
Slings can be used to lift the crates, but spreader bars must
be used to prevent the slings from exerting a force against
the sides of the crates.
RELEASED 06/Dec/2018 22:26:36 GMT
RECEIPT OF EQUIPMENT
TOOLS
Remove compressor unit from wooden skid. A crowbar and
hammer will be needed.
WILL REDUCE SCRATCHES
IMPORTANT
Before starting this air compressor unit, the shipping
brace(s) must be removed. Save the brace(s) for future
use.
FORKLIFT PADDING
AND MARS
SPREADER
BARS
Hide quick links:
Advertisement
Table of Contents
