Crestron CNLCDRFHT-A User Manual

One-way wireless transmitter

CRESTRON CNLCDRFHTA

Functional Description

The CNLCDRFHTA hand-held one-way wireless radio frequency (RF) transmitter operates with a

CRESNET II control system with the use of a RF receiver (CNRFGWA, network unit).

The transmitter is housed in a black, high-impact molded plastic enclosure. The standard unit is supplied

with custom engraved front panel and a choice of colored button caps, panel finishes, and button

configurations. Unused buttons are omitted.

CRESNET II Workshop Version 4.30 or later.

CRESNET II Operating System SR30314.OPS or later.

Dimensions:

Weight:

R E M O T E

C O N T R O L

S Y S T E M S

Height 5.750 in (14.605 cm)

Width 3.580 in (9.093 cm)

Depth 1.140 in (2.896 cm)

0.56 lbs (0.254 Kg)

Specifications subject to change without notice.

One-Way Wireless Transmitter

DOC. 8110

Table of Contents

Do you have a question about the CNLCDRFHT-A and is the answer not in the manual?

Page 1: Functional Description
CRESTRON CNLCDRFHTA DESCRIPTION: Functional Description The CNLCDRFHTA hand-held one-way wireless radio frequency (RF) transmitter operates with a CRESNET II control system with the use of a RF receiver (CNRFGWA, network unit). Physical Description The transmitter is housed in a black, high-impact molded plastic enclosure. The standard unit is supplied with custom engraved front panel and a choice of colored button caps, panel finishes, and button configurations.
Page 2: Further Inquiries
"Page" is selected. FURTHER INQUIRIES: If after reviewing this Operations Guide you still have additional questions, please contact a CRESTRON technical support representative in your area by dialing one of the following numbers.
Page 3 CRESTRON CNLCDRFHTA SYNTAX: The following syntax codes are provided for compatibility purposes only. NET.ID <10 to FE>: CNRFGWA TRANSMITTER <ID CODE>: CNRFT i1 = <signal name> i2 = <signal name> i3 = <signal name> " = " " " = "...