SMART Board 6000 Series User Manual page 60

Chapter 5
Changing settings
2. Tap General Settings.
3. Change settings:
Control
Start SMART Ink
when you log on
Erase ink after it's
converted to text
Always show pen
toolbars
4. Tap Apply, and then tap OK.
smarttech.com/kb/171190
Procedure
Select the check box to start
SMART Ink automatically when you log
on to the computer.
Select the check box to erase ink after
you insert it as text in an application.
Select the check box to always display
the floating toolbars when your
computer is connected to a SMART
interactive product.
Notes
If you clear the check box, SMART Ink
doesn't start when you log on to the
computer and you must start it
manually before you can write or draw
over applications or create SMART Ink
Notes (see Using the SMART Ink 5
dynamic (floating) toolbar on page 6).
[N/A]
Changes to this check box take effect
after you restart SMART Ink.
60