SMART Board 6000 Series User Manual page 18

Chapter 2
Using SMART Ink
To draw a shape
1. Open SMART Ink's dynamic (floating) toolbar in full mode (see Opening the dynamic (floating) toolbar
on page 6).
OR
Open the SMART Touch Inking Tool dynamic toolbar in full mode (see Starting the SMART Touch
Inking Tool on page 9).
2. Tap .
3. Tap , and then select
4. Set the color and line thickness for the shape recognition pen.
5. Draw a shape using the shape recognition pen.
If SMART Ink recognizes your drawing as a circle, oval, square, rectangle, triangle or arc, it converts the
drawing to that appropriate shape.
Erasing
The procedure for erasing digital ink depends on the type of SMART interactive product that you're using:
Interactive product(s)
Interactive displays
SMART Board 7000
SMART Board 8000i-G5
SMART Board 8000i-G4
SMART Board 8000i-G3
SMART Board 6000
smarttech.com/kb/171190
.
Procedure
Move the eraser end of a pen over the digital ink you want to erase.
OR
Move your palm or fist over the digital ink you want to erase.
OR
Move the eraser over the digital ink you want to erase.
Move the eraser end of a pen over the digital ink you want to erase.
OR
Move your palm or fist over the digital ink you want to erase.
Move the eraser over the digital ink you want to erase.
OR
Move your palm or fist over the digital ink you want to erase.
Move the eraser end of a pen over the digital ink you want to erase.
OR
Move your palm or fist over the digital ink you want to erase.
18