SMART Board 6000 Series User Manual page 19

Chapter 2
Using SMART Ink
Interactive product(s)
SMART Board 4000
Interactive whiteboards
SMART Board 800
SMART Board M600
SMART Board 600
Other interactive products
LightRaise® 60wi2
LightRaise 60wi
SMART Podium™
Writing, drawing or erasing at the same time as another user
On the following SMART interactive products, two users can write, draw and erase at the same time:
SMART Board 7000 series interactive displays
l
SMART Board 8000i-G5 series interactive flat panels
l
SMART Board 8000i-G3 and 8000i-G4 series interactive flat panels
l
smarttech.com/kb/171190
Procedure
1. Open SMART Ink's dynamic (floating) toolbar in full mode (see Opening
the dynamic (floating) toolbar on page 6).
OR
Open the SMART Touch Inking Tool dynamic toolbar in full mode (see
Starting the SMART Touch Inking Tool on page 9).
2. Tap , and then select an eraser size.
3. Move your finger over the digital ink you want to erase.
Move the eraser over the digital ink you want to erase.
OR
Move your palm or fist over the digital ink you want to erase.
1. Tap the Eraser button on the pen tray.
OR
Do the following:
a. Open the toolbar in full mode (see page 6).
b. Tap , and then select an eraser size.
2. Move your finger over the digital ink you want to erase.
Move the eraser over the digital ink you want to erase.
OR
Move your palm or fist over the digital ink you want to erase.
1. Open the SMART Ink toolbar in full mode (see page 6).
2. Tap , and then select an eraser size.
3. Move your finger over the digital ink you want to erase.
1. Tap the Eraser button on the interactive pen display.
2. Move the tethered pen over the digital ink you want to erase.
19