SMART Board 6000 Series User Manual page 57

Chapter 5
Changing settings
3. Change settings:
Control
Restore Toolbar
Positions
Always show pen
toolbars
SMART Touch
Inking Tool
4. Tap Apply, and then tap OK.
To change Microsoft Office settings
1. If the floating toolbar is open, tap
OR
If the toolbar isn't open, do one of the following:
In Windows 7 operating system, select Start > All Programs > SMART Technologies >
o
SMART Tools > SMART Ink Settings.
In Windows 8.1 operating system, go to the Apps screen and then scroll to and tap
o
SMART Technologies > SMART Ink Settings.
In Windows 10 operating system, select Start > All apps, and then scroll to and select
o
SMART Technologies > SMART Ink Settings.
The SMART Ink Settings window appears.
smarttech.com/kb/171190
Procedure
Tap Reset SMART Ink toolbars to
their default positions to return
floating toolbars to their original
positions on the screen.
Select the check box to always display
the floating toolbars when your
computer is connected to a SMART
interactive product.
Tap Start SMART Touch Inking Tool
to turn on the SMART Touch
Inking Tool (see Getting started with
the SMART Touch Inking Tool on
page 8).
OR
Tap Close SMART Touch Inking Tool
to turn off the SMART Touch
Inking Tool.
in the toolbar's lower-right corner.
Notes
[N/A]
Changes to this check box take effect
after you restart SMART Ink.
This control is available only if your
computer is connected to a SMART
interactive product that supports touch
recognition and if SMART Notebook
software is installed on your computer.
57