Functional Messages - oventrop OV-DMC 2 Operating Instructions Manual

In the main menu "Measure (start)", the functional sequence of the measuring
head is shown on the display. This message only appears on the screen for a
few seconds. The sequence is continued automatically.
This message has no significance for the handling of the flow meter but only
shows that stored data has been saved.
This message appears if no more storage locations are available (see page 30).
32

Functional messages

Attention
Close bypass
> Yes <
Attention
Open bypass
> Yes <
Attention
Saved data
STORE MEASUREMENT
---------------------
---------------------
STORE MEASUREMENT
? DELETE ?
No