Page 1
Premium Armaturen + Systeme „OV-DMC 3“ Messsystem mit WLAN-Funktion Betriebsanleitung “OV-DMC 3” Measuring system with WLAN function Operating instructions «OV-DMC 3» Système de mesure avec fonction WIFI Notice d’utilisation...
“OV-DMC 3” Contents Contents Page General information ..................21 Applicability of the operating instructions ............... 21 Type plate ........................21 Scope of delivery ......................21 Contact ..........................21 Copyright and property rights ..................21 Declaration of conformity ....................21 Information regarding operating instructions ..............22 1.7.1...
Page 3
Contents “OV-DMC 3” Connecting to the power supply ..................27 Connecting the “OV-DMC 3” measuring system ............28 Switching on the “OV-DMC 3” ..............30 Operation ......................30 Troubleshooting .....................31 Low charging status ......................31 Damage caused by falling ....................31 Maintenance ....................32 10.1...
These operating instructions are copyrighted. They are exclusively designed for persons involved with the product. 1.6 Declaration of conformity Oventrop GmbH & Co. KG hereby declares that this product complies with the basic require- ments and other relevant provisions of the EC Directives concerned.
Safety in operation is only guaranteed if the erate risk. The situation may lead to product is used correctly. death or serious injury if not avoided. The “OV-DMC 3” measuring system is de- signed for hydraulic adjustment of heating and CAUTION cooling systems.
3.1 Functional description There is danger of injury by falling when using unsecured ladders or similar supports. The “OV-DMC 3” measuring system is specially designed for the simple and rapid adjustment f Ensure that any such equipment is stable. of heating and cooling systems.
“OV-DMC 3” Technical description WLAN / Wi-Fi Air humidity max. 90 % RH - RED (flashing) The appliance is Temperature PT 1000 starting sensor type - MAGENTA The appliance is Power supply LiFe battery or using (flashing) ready to us as an enclosed USB power access point supply unit.
Accessories and spare parts “OV-DMC 3” 3.4 Operating system Transport and storage requirements for display Transport the measuring system in its original devices packaging. • iOS version 7.1 minimum Follow the applicable transport • Android version 3.0 minimum (Honeycomb) requirements for LiFEP04 (lithium iron phosphate) batteries.
Applications for measurement and evaluation tery can heat up so much that it catch- using the “OV-DMC 3” are available for the es fire or explodes. following operating systems: f To charge the battery, only use the • iOS...
Commissioning “OV-DMC 3” 6.3 Connecting the “OV-DMC 3” CAUTION measuring system Risk of injury caused by the product falling WARNING There is a danger of injuries caused Risk of injury caused by unsta- by the product falling down, especially ble position from greater heights.
Page 12
Illust. 5: Connections for measuring hoses Illust. 6: Connection example Supply flow (red) Return flow (blue) 1. Connect the measuring hoses with the quick connections on the “OV-DMC 3”. For Oventrop products, note the colour coding (red and blue) on the couplings and on the valve Red denotes the supply flow, blue the return flow 106927880-V02.03.2019...
Check the measuring hoses for unobstructed water flow. f Clean or replace the dirt strainers if they are dirty. The “OV-DMC 3” software enables valves to be adjusted using a range of measurement methods. During this process measurement values (differential pressure and flow rate) are given and displayed graphically. The supply...
WARNING Explosion and fire hazard If you connect the “OV-DMC 3” sensor to the charger after the batteries have been deeply discharged, the battery may heat up so much that it catches fire or explodes.
If connected, disconnect the pow- er supply from the mains plug. f Transport the measuring system in its origi- f Contact the Oventrop service nal packaging. department f If there is a defect, do not open the housing.
The battery is permanently installed in the “OV-DMC 3” measuring system and cannot be removed. If the battery shows any signs of damage, dispose of the product appropriately.