Measurement-Setup; Valve-Setup - oventrop OV-DMC 2 Operating Instructions Manual

Measurement-Setup

Measuring
method------------- Choice of the measuring methods by using the
keys
Balanced pressure method, kv-value method, computer
method, OV-Balance
Pressure----------- Choice of the unit for pressure indication by using the
keys
Flow----------------- Choice of the unit for flow rates by using the keys
Water--------------- Choice of the medium (e.g. ethylene glycol) in the heating
circuit by using the keys
When using ethylene glycol, indicate the percentage
composition by pressing the key
can be modified by using the keys
Connect the temperature sensor to the flow meter. An
error message (see Temperature Measurement page 14)
appears if there is no sensor connected.
Change to temperature measurement by pressing the key
"OK".
Confirm the measured temperature by using the key
"OK". The main menu is called up at the same time.
Choice of the medium (e.g. ethylene glycol).

Valve-Setup

Oventrop ---------- Choice of the valve manufacturer by using the keys
Type----------------- Change to valve type by using the key
Choice of the valve type by using the keys
and
Size------------------Change to valve size by using the key
Choice of the valve sizes (dimensions) by using the
keys
and .
and .
and .
and .
.
and .
Measurement-Setup/Valve-Setup
and .
. The indicated value
and .
.
.
MEASUREMENT-SETUP
---------------------
---------------------
BALANCED PRESSURE
pressure: mbar
flow: l/h
Water
MEASUREMENT-SETUP
---------------------
---------------------
KV VALUE METHOD
pressure: mbar
flow: l/h
Water
MEASUREMENT-SETUP
---------------------
---------------------
COMPUTER METHOD
pressure: mbar
flow: l/h
Water
MEASUREMENT-SETUP
---------------------
---------------------
BALANCED PRESSURE
METHOD
pressure: mbar
flow: l/h
Ethylen glycol 35%
VALVE-SETUP
---------------------
---------------------
OVENTROP
type: Hydrocon
size: 020
13