Risk Of Injury Caused By Unstable Position; Risk Of Injury Caused By The Product Falling; Risk Of Injury Due To Improper Work Precautions; Damage To The Appliance Caused By Improper Handling - oventrop OV-DMC 3 Operating Instructions Manual

Technical description

2.5.7 Risk of injury caused by unstable
position
There is danger of injury by falling when using
unsecured ladders or similar supports.
f Ensure that any such equipment is stable.
f When working at height, obtain the help of
a second person to secure the equipment.
2.5.8 Risk of injury caused by the
product falling
There is a danger of injuries caused by the
product falling down, especially from greater
heights.
f Secure the product against falling down.
f Wear suitable safety equipment.
2.5.9 Risk of injury due to improper
work precautions
Stored residual energy and sharp components,
edges, and protrusions on the product may
cause injuries.
f Ensure that there is sufficient space before
starting work.
f Handle open and sharp-edged compo-
nents with care.
f Keep the workplace tidy and clean to avoid
accidents.
f Wear suitable protective clothing.
2.5.10 Damage to the appliance caused
by improper handling
f Protect the product against external forces
such as impact, shock, vibration, etc.
f Do not use measuring hoses to absorb
external forces, i.e. as a replacement for
supporting equipment, etc.
f Use only suitable transport equipment.
2.5.11 Availability of the operating
instructions
The operating instructions must be available at
the installation location.
24
3. Technical description

3.1 Functional description

The "OV-DMC 3" measuring system is specially
designed for the simple and rapid adjustment
of heating and cooling systems.
Communication takes place via Wi-Fi using
standard commercial smartphones, tablets,
notebooks, and PCs.
The "OV-DMC 3" also enables permanent re-
cording of the differential pressure and the flow
rate. This means that system conditions can be
recorded over longer periods of time.
The supply flow and return flow temperatures
can be simultaneously measured using an ex-
ternally connected PT1000 temperature sensor.
3.2 Operating elements and
displays
Illust. 2: Operating elements
"OV-DMC 3"
1
2
3
106927880-V02.03.2019