oventrop OV-DMC 2 Operating Instructions Manual page 24

After having completed
the measurement of all
valves of a regulating
group, the group valve
is measured.
Display shows "0".
Go to next menu win-
dow by using the key
"OK".
Choose the valve
manufacturer by using
the keys .
Change to valve type
via .
Choice of valve type via
.
Change to valve size via
.
Choice of valve size via
.
Go to next menu win-
dow by using the key
"OK".
User information.
Go to next menu win-
dow by using the key
"OK".
User information.
Go to next menu win-
dow by using the key
"OK".
Display of presetting 0.0
for closed valve.
Go to next menu win-
dow by using the key
"OK".
Display of command
"Store".
Go to next menu win-
dow by using the key
"OK".
24
OV-BALANCE
---------------------
--------------------- in object
Cellar G.: 1 / 0
Hydrocon R DN 25
3.0 preset'g. 0.0
mbar
l/h
>STORE<
VALVE-SETUP
---------------------
---------------------
OVENTROP
type: Hydrocon R
size: DN 25
OV-BALANCE
---------------------
--------------------- in object
Attention
GROUP VALVE
OV-BALANCE
---------------------
--------------------- in object
Attention
close valve
OV-BALANCE
---------------------
--------------------- in object
Cellar G.: 1 / 0
Hydrocon R DN 25
- - - preset'g. 0.0
mbar
l/h
>STORE<
OV-BALANCE
---------------------
--------------------- in object
Cellar G.: 1 / 0
Hydrocon R DN 25
- - - preset'g. 0.0
mbar
l/h
>STORE<
User information.
Set back valve to former
presetting (e.g. 3.0).
Go to next menu win-
dow by using the key
"OK".
Referring to the
following calculation of
the presetting values.
Go to next menu win-
dow by using the key
"OK".
Referring to incorrect
calculation of the pre-
setting values (valve no.
2 probably has to be
measured again).
Go to next menu win-
dow by using the key
"OK".
After successful calculati-
on, the presetting values
can be queried according
to the valve numbers (e.g.
valve data of valve 1).
Choice of the valve num-
ber by using the keys
.
Change to main menu by
pressing the key .
Menu option
OV-Balance
Group valve
OV-BALANCE
---------------------
--------------------- in object
Attention
reset valve
OV-BALANCE
---------------------
---------------------
OV-BALANCE
? CALCULATE ?
YES
Attention
check valve
--- 2 ---
SETTINGS
---------------------
---------------------
Name: Cellar
G.: 1 No.: 1
0.20 l/h
128.0 mbar
Hydrocon R DN 20
presetting: 1.5
MAINMENU
---------------------
---------------------
SYSTEM-SETUP
MEASUREMENT-
SETUP
VALVE SETUP
MEASURE (START)
TEMP. MEASUREMENT