Elite EliteTIG AC/DC 225 User Manual page 68

Ignición TIG LIFT ARC
1. PLACE THE TORCH IN
POSITION.
1- Negative quick connector (for torch).
2- Positive quick connector (for work clamp).
3- Connector for torch trigger.
4- Connector for torch gas outlet.
5- Connector for gas inlet.
www.ELITETOOLS.co
2. BRING THE TORCH
CLOSE AT A DISTANCE OF
2 TO 4 MM AND PRESS THE
TRIGGER TO START THE
HF.
3. HOLD THE TRIGGER TO
START THE ARC.
Keep Working
24