Elite EliteTIG AC/DC 225 User Manual page 58

Warning
If the machine is placed more than 10 ° from the horizontal, it can rotate on its axis
causing damage.
1
1.- TIG AC or TIG DC selection panel.
2.- MMA process selection panel, HF start TIG, LIFT ARC start TIG.
3.- 2T (2 touch operation) or 4T (4 touch operation) selection panel.
4.- Waveform selection panel.
5.- TIG AC and DC curve parameters configuration panel.
6.- TIG AC balance and frequency configuration panel.
7.- Hot Start, Arc Force and inductance (MMA) configuration panel.
8.- Configuration knob with push button.
9.- Current and special parameters display screen.
10.- Voltage display screen.
11.- Power and protection indicators.
12.- Indicators for units displayed on the screen.
www.ELITETOOLS.co
11
12
9
2 3
10
4 5
8
6 7
Keep Working
14